home *** CD-ROM | disk | FTP | other *** search
- Path: walrus.megabaud.fi!not-for-mail
- From: petrin@walrus.megabaud.fi (Petri Nordlund)
- Newsgroups: comp.sys.amiga.networking
- Subject: Proper Settings for executive w/ Amitcp/Aweb/Ibrowse wanted !
- Date: 3 Apr 1996 20:14:46 +0300
- Organization: Megabaud Oy,Helsinki,Finland
- Message-ID: <4jubm6$e9c@walrus.megabaud.fi>
- NNTP-Posting-Host: walrus.megabaud.fi
-
- Flexy (starecjc@hydra.zrz.TU-Berlin.DE) writes:
-
- >I just installed executive (ok.i promise i will read the WHOLE doc then ;)
- >and have questions....
- >
- >Some tasks in amitcp (for.ex the rhcslip.device and other things) run
- >at PRI +5... how should i configure executive ? Should it catch this
- >tasks also by setting the catch-range value higher ?
-
- No, tasks that have priority higher than +1 - +2 are meant to be run
- at that priority. Scheduling them usually causes serious problems
- because these tasks wouldn't get enough CPU time.
-
- The current catch-range maximum, +2, is actually a bit too high,
- +1 would be better, and I intend to change it to that in Executive
- V2.00.
-
- >Does anyone have a recommendation for "good" settings (what sheduler, what
- >tasks i should enter in the executive-prefs with which values ?) for
- >a system as is mine with AmiTCP and its clients running like Aweb,
- >Ibrowse and so on ?
-
- Queues is definitely the best scheduler, much better than the Standard-
- scheduler. If you don't experience any problems with AmiTCP and it's
- clients, then there's no need to do anything. Otherwise please contact
- me and I'll see what's wrong.
-
- For latest information about Executive, see:
-
- http://www.megabaud.fi/~petrin/Executive.html
-
- Please also sign the guestbook I just added.
- --
- __
- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~///~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Petri Nordlund __/// petrin@megabaud.fi
- ---------------------------------\XX/----------------------------------
-